RCR 75 Capillary Rheometer for rubber

The Rubber-Capillary-Rheometer RCR 75 is a capillary rheometer for rubber applications with a maximum test load of 75 kN. The RCR is optimized for the shortest possible measuring time and easy operation to provide very fast results especially in QC applications. A typical measurement takes about 2-5 minutes.

In open extrusion mode, the RCR is operated as a standard capillary rheometer, and the viscosity is determined at up to three shear rates per barrel filling. The shear rate is determined from the piston speed and the shear stress from the piston force.

In the optional injection mode, the material is typically injected at constant pressure into an independently heated mold that is typically kept at a higher temperature. In this mode, both the flow and vulcanization behavior of the rubber or compound is characterized very close to the process conditions.

The viscosity of thermosets (duroplasts/duromers) such as epoxy or phenolic resins can also be measured optionally. For this purpose, a special, easy to clean barrel with an easily removable, split die is used.

The capillaries are easily exchangeable and different barrel diameters and die geometries are available. It is possible to switch between the two test modes under program control without having to modify the testing device.